Spark Configuration

Spark provides three locations to configure the system:

Spark Properties

Spark properties control most application settings and are configured separately for each application. These properties can be set directly on a SparkConf passed to your SparkContext. SparkConf allows you to configure some of the common properties (e.g. master URL and application name), as well as arbitrary key-value pairs through the set() method. For example, we could initialize an application as follows:

val conf = new SparkConf()
             .setMaster("local")
             .setAppName("CountingSheep")
             .set("spark.executor.memory", "1g")
val sc = new SparkContext(conf)

Dynamically Loading Spark Properties

In some cases, you may want to avoid hard-coding certain configurations in a SparkConf. For instance, if you’d like to run the same application with different masters or different amounts of memory. Spark allows you to simply create an empty conf:

val sc = new SparkContext(new SparkConf())

Then, you can supply configuration values at runtime:

./bin/spark-submit --name "My fancy app" --master local[4] myApp.jar

The Spark shell and spark-submit tool support two ways to load configurations dynamically. The first are command line options, such as --master, as shown above. Running ./bin/spark-submit --help will show the entire list of options.

bin/spark-submit will also read configuration options from conf/spark-defaults.conf, in which each line consists of a key and a value separated by whitespace. For example:

spark.master            spark://5.6.7.8:7077
spark.executor.memory   512m
spark.eventLog.enabled  true
spark.serializer        org.apache.spark.serializer.KryoSerializer

Any values specified as flags or in the properties file will be passed on to the application and merged with those specified through SparkConf. Properties set directly on the SparkConf take highest precedence, then flags passed to spark-submit or spark-shell, then options in the spark-defaults.conf file.

Viewing Spark Properties

The application web UI at http://<driver>:4040 lists Spark properties in the “Environment” tab. This is a useful place to check to make sure that your properties have been set correctly. Note that only values explicitly specified through either spark-defaults.conf or SparkConf will appear. For all other configuration properties, you can assume the default value is used.

Available Properties

Most of the properties that control internal settings have reasonable default values. Some of the most common options to set are:

Application Properties

Property NameDefaultMeaning
spark.app.name (none) The name of your application. This will appear in the UI and in log data.
spark.master (none) The cluster manager to connect to. See the list of allowed master URL's.
spark.executor.memory 512m Amount of memory to use per executor process, in the same format as JVM memory strings (e.g. 512m, 2g).
spark.serializer org.apache.spark.serializer.
JavaSerializer
Class to use for serializing objects that will be sent over the network or need to be cached in serialized form. The default of Java serialization works with any Serializable Java object but is quite slow, so we recommend using org.apache.spark.serializer.KryoSerializer and configuring Kryo serialization when speed is necessary. Can be any subclass of org.apache.spark.Serializer.
spark.kryo.registrator (none) If you use Kryo serialization, set this class to register your custom classes with Kryo. It should be set to a class that extends KryoRegistrator. See the tuning guide for more details.
spark.local.dir /tmp Directory to use for "scratch" space in Spark, including map output files and RDDs that get stored on disk. This should be on a fast, local disk in your system. It can also be a comma-separated list of multiple directories on different disks. NOTE: In Spark 1.0 and later this will be overriden by SPARK_LOCAL_DIRS (Standalone, Mesos) or LOCAL_DIRS (YARN) environment variables set by the cluster manager.
spark.logConf false Logs the effective SparkConf as INFO when a SparkContext is started.

Apart from these, the following properties are also available, and may be useful in some situations:

Runtime Environment

Property NameDefaultMeaning
spark.executor.memory 512m Amount of memory to use per executor process, in the same format as JVM memory strings (e.g. 512m, 2g).
spark.executor.extraJavaOptions (none) A string of extra JVM options to pass to executors. For instance, GC settings or other logging. Note that it is illegal to set Spark properties or heap size settings with this option. Spark properties should be set using a SparkConf object or the spark-defaults.conf file used with the spark-submit script. Heap size settings can be set with spark.executor.memory.
spark.executor.extraClassPath (none) Extra classpath entries to append to the classpath of executors. This exists primarily for backwards-compatibility with older versions of Spark. Users typically should not need to set this option.
spark.executor.extraLibraryPath (none) Set a special library path to use when launching executor JVM's.
spark.files.userClassPathFirst false (Experimental) Whether to give user-added jars precedence over Spark's own jars when loading classes in Executors. This feature can be used to mitigate conflicts between Spark's dependencies and user dependencies. It is currently an experimental feature.

Shuffle Behavior

Property NameDefaultMeaning
spark.shuffle.consolidateFiles false If set to "true", consolidates intermediate files created during a shuffle. Creating fewer files can improve filesystem performance for shuffles with large numbers of reduce tasks. It is recommended to set this to "true" when using ext4 or xfs filesystems. On ext3, this option might degrade performance on machines with many (>8) cores due to filesystem limitations.
spark.shuffle.spill true If set to "true", limits the amount of memory used during reduces by spilling data out to disk. This spilling threshold is specified by spark.shuffle.memoryFraction.
spark.shuffle.spill.compress true Whether to compress data spilled during shuffles. Compression will use spark.io.compression.codec.
spark.shuffle.memoryFraction 0.3 Fraction of Java heap to use for aggregation and cogroups during shuffles, if spark.shuffle.spill is true. At any given time, the collective size of all in-memory maps used for shuffles is bounded by this limit, beyond which the contents will begin to spill to disk. If spills are often, consider increasing this value at the expense of spark.storage.memoryFraction.
spark.shuffle.compress true Whether to compress map output files. Generally a good idea. Compression will use spark.io.compression.codec.
spark.shuffle.file.buffer.kb 100 Size of the in-memory buffer for each shuffle file output stream, in kilobytes. These buffers reduce the number of disk seeks and system calls made in creating intermediate shuffle files.
spark.reducer.maxMbInFlight 48 Maximum size (in megabytes) of map outputs to fetch simultaneously from each reduce task. Since each output requires us to create a buffer to receive it, this represents a fixed memory overhead per reduce task, so keep it small unless you have a large amount of memory.

Spark UI

Property NameDefaultMeaning
spark.ui.port 4040 Port for your application's dashboard, which shows memory and workload data
spark.ui.retainedStages 1000 How many stages the Spark UI remembers before garbage collecting.
spark.ui.killEnabled true Allows stages and corresponding jobs to be killed from the web ui.
spark.eventLog.enabled false Whether to log Spark events, useful for reconstructing the Web UI after the application has finished.
spark.eventLog.compress false Whether to compress logged events, if spark.eventLog.enabled is true.
spark.eventLog.dir file:///tmp/spark-events Base directory in which Spark events are logged, if spark.eventLog.enabled is true. Within this base directory, Spark creates a sub-directory for each application, and logs the events specific to the application in this directory. Users may want to set this to a unified location like an HDFS directory so history files can be read by the history server.

Compression and Serialization

Property NameDefaultMeaning
spark.broadcast.compress true Whether to compress broadcast variables before sending them. Generally a good idea.
spark.rdd.compress false Whether to compress serialized RDD partitions (e.g. for StorageLevel.MEMORY_ONLY_SER). Can save substantial space at the cost of some extra CPU time.
spark.io.compression.codec org.apache.spark.io.
LZFCompressionCodec
The codec used to compress internal data such as RDD partitions and shuffle outputs. By default, Spark provides two codecs: org.apache.spark.io.LZFCompressionCodec and org.apache.spark.io.SnappyCompressionCodec. Of these two choices, Snappy offers faster compression and decompression, while LZF offers a better compression ratio.
spark.io.compression.snappy.block.size 32768 Block size (in bytes) used in Snappy compression, in the case when Snappy compression codec is used.
spark.closure.serializer org.apache.spark.serializer.
JavaSerializer
Serializer class to use for closures. Currently only the Java serializer is supported.
spark.serializer.objectStreamReset 10000 When serializing using org.apache.spark.serializer.JavaSerializer, the serializer caches objects to prevent writing redundant data, however that stops garbage collection of those objects. By calling 'reset' you flush that info from the serializer, and allow old objects to be collected. To turn off this periodic reset set it to a value <= 0. By default it will reset the serializer every 10,000 objects.
spark.kryo.referenceTracking true Whether to track references to the same object when serializing data with Kryo, which is necessary if your object graphs have loops and useful for efficiency if they contain multiple copies of the same object. Can be disabled to improve performance if you know this is not the case.
spark.kryoserializer.buffer.mb 2 Maximum object size to allow within Kryo (the library needs to create a buffer at least as large as the largest single object you'll serialize). Increase this if you get a "buffer limit exceeded" exception inside Kryo. Note that there will be one buffer per core on each worker.

Execution Behavior

Property NameDefaultMeaning
spark.default.parallelism
  • Local mode: number of cores on the local machine
  • Mesos fine grained mode: 8
  • Others: total number of cores on all executor nodes or 2, whichever is larger
Default number of tasks to use across the cluster for distributed shuffle operations (groupByKey, reduceByKey, etc) when not set by user.
spark.broadcast.factory org.apache.spark.broadcast.
HttpBroadcastFactory
Which broadcast implementation to use.
spark.broadcast.blockSize 4096 Size of each piece of a block in kilobytes for TorrentBroadcastFactory. Too large a value decreases parallelism during broadcast (makes it slower); however, if it is too small, BlockManager might take a performance hit.
spark.files.overwrite false Whether to overwrite files added through SparkContext.addFile() when the target file exists and its contents do not match those of the source.
spark.files.fetchTimeout false Communication timeout to use when fetching files added through SparkContext.addFile() from the driver.
spark.storage.memoryFraction 0.6 Fraction of Java heap to use for Spark's memory cache. This should not be larger than the "old" generation of objects in the JVM, which by default is given 0.6 of the heap, but you can increase it if you configure your own old generation size.
spark.tachyonStore.baseDir System.getProperty("java.io.tmpdir") Directories of the Tachyon File System that store RDDs. The Tachyon file system's URL is set by spark.tachyonStore.url. It can also be a comma-separated list of multiple directories on Tachyon file system.
spark.storage.memoryMapThreshold 8192 Size of a block, in bytes, above which Spark memory maps when reading a block from disk. This prevents Spark from memory mapping very small blocks. In general, memory mapping has high overhead for blocks close to or below the page size of the operating system.
spark.tachyonStore.url tachyon://localhost:19998 The URL of the underlying Tachyon file system in the TachyonStore.
spark.cleaner.ttl (infinite) Duration (seconds) of how long Spark will remember any metadata (stages generated, tasks generated, etc.). Periodic cleanups will ensure that metadata older than this duration will be forgotten. This is useful for running Spark for many hours / days (for example, running 24/7 in case of Spark Streaming applications). Note that any RDD that persists in memory for more than this duration will be cleared as well.
spark.hadoop.validateOutputSpecs true If set to true, validates the output specification (e.g. checking if the output directory already exists) used in saveAsHadoopFile and other variants. This can be disabled to silence exceptions due to pre-existing output directories. We recommend that users do not disable this except if trying to achieve compatibility with previous versions of Spark. Simply use Hadoop's FileSystem API to delete output directories by hand.

Networking

Property NameDefaultMeaning
spark.driver.host (local hostname) Hostname or IP address for the driver to listen on.
spark.driver.port (random) Port for the driver to listen on.
spark.akka.frameSize 10 Maximum message size to allow in "control plane" communication (for serialized tasks and task results), in MB. Increase this if your tasks need to send back large results to the driver (e.g. using collect() on a large dataset).
spark.akka.threads 4 Number of actor threads to use for communication. Can be useful to increase on large clusters when the driver has a lot of CPU cores.
spark.akka.timeout 100 Communication timeout between Spark nodes, in seconds.
spark.akka.heartbeat.pauses 600 This is set to a larger value to disable failure detector that comes inbuilt akka. It can be enabled again, if you plan to use this feature (Not recommended). Acceptable heart beat pause in seconds for akka. This can be used to control sensitivity to gc pauses. Tune this in combination of `spark.akka.heartbeat.interval` and `spark.akka.failure-detector.threshold` if you need to.
spark.akka.failure-detector.threshold 300.0 This is set to a larger value to disable failure detector that comes inbuilt akka. It can be enabled again, if you plan to use this feature (Not recommended). This maps to akka's `akka.remote.transport-failure-detector.threshold`. Tune this in combination of `spark.akka.heartbeat.pauses` and `spark.akka.heartbeat.interval` if you need to.
spark.akka.heartbeat.interval 1000 This is set to a larger value to disable failure detector that comes inbuilt akka. It can be enabled again, if you plan to use this feature (Not recommended). A larger interval value in seconds reduces network overhead and a smaller value ( ~ 1 s) might be more informative for akka's failure detector. Tune this in combination of `spark.akka.heartbeat.pauses` and `spark.akka.failure-detector.threshold` if you need to. Only positive use case for using failure detector can be, a sensistive failure detector can help evict rogue executors really quick. However this is usually not the case as gc pauses and network lags are expected in a real Spark cluster. Apart from that enabling this leads to a lot of exchanges of heart beats between nodes leading to flooding the network with those.

Scheduling

Property NameDefaultMeaning
spark.task.cpus 1 Number of cores to allocate for each task.
spark.task.maxFailures 4 Number of individual task failures before giving up on the job. Should be greater than or equal to 1. Number of allowed retries = this value - 1.
spark.scheduler.mode FIFO The scheduling mode between jobs submitted to the same SparkContext. Can be set to FAIR to use fair sharing instead of queueing jobs one after another. Useful for multi-user services.
spark.cores.max (not set) When running on a standalone deploy cluster or a Mesos cluster in "coarse-grained" sharing mode, the maximum amount of CPU cores to request for the application from across the cluster (not from each machine). If not set, the default will be spark.deploy.defaultCores on Spark's standalone cluster manager, or infinite (all available cores) on Mesos.
spark.mesos.coarse false If set to "true", runs over Mesos clusters in "coarse-grained" sharing mode, where Spark acquires one long-lived Mesos task on each machine instead of one Mesos task per Spark task. This gives lower-latency scheduling for short queries, but leaves resources in use for the whole duration of the Spark job.
spark.speculation false If set to "true", performs speculative execution of tasks. This means if one or more tasks are running slowly in a stage, they will be re-launched.
spark.speculation.interval 100 How often Spark will check for tasks to speculate, in milliseconds.
spark.speculation.quantile 0.75 Percentage of tasks which must be complete before speculation is enabled for a particular stage.
spark.speculation.multiplier 1.5 How many times slower a task is than the median to be considered for speculation.
spark.locality.wait 3000 Number of milliseconds to wait to launch a data-local task before giving up and launching it on a less-local node. The same wait will be used to step through multiple locality levels (process-local, node-local, rack-local and then any). It is also possible to customize the waiting time for each level by setting spark.locality.wait.node, etc. You should increase this setting if your tasks are long and see poor locality, but the default usually works well.
spark.locality.wait.process spark.locality.wait Customize the locality wait for process locality. This affects tasks that attempt to access cached data in a particular executor process.
spark.locality.wait.node spark.locality.wait Customize the locality wait for node locality. For example, you can set this to 0 to skip node locality and search immediately for rack locality (if your cluster has rack information).
spark.locality.wait.rack spark.locality.wait Customize the locality wait for rack locality.
spark.scheduler.revive.interval 1000 The interval length for the scheduler to revive the worker resource offers to run tasks. (in milliseconds)

Security

Property NameDefaultMeaning
spark.authenticate false Whether Spark authenticates its internal connections. See spark.authenticate.secret if not running on YARN.
spark.authenticate.secret None Set the secret key used for Spark to authenticate between components. This needs to be set if not running on YARN and authentication is enabled.
spark.core.connection.auth.wait.timeout 30 Number of seconds for the connection to wait for authentication to occur before timing out and giving up.
spark.ui.filters None Comma separated list of filter class names to apply to the Spark web UI. The filter should be a standard javax servlet Filter. Parameters to each filter can also be specified by setting a java system property of:
spark.<class name of filter>.params='param1=value1,param2=value2'
For example:
-Dspark.ui.filters=com.test.filter1
-Dspark.com.test.filter1.params='param1=foo,param2=testing'
spark.ui.acls.enable false Whether Spark web ui acls should are enabled. If enabled, this checks to see if the user has access permissions to view the web ui. See spark.ui.view.acls for more details. Also note this requires the user to be known, if the user comes across as null no checks are done. Filters can be used to authenticate and set the user.
spark.ui.view.acls Empty Comma separated list of users that have view access to the Spark web ui. By default only the user that started the Spark job has view access.

Spark Streaming

Property NameDefaultMeaning
spark.streaming.blockInterval 200 Interval (milliseconds) at which data received by Spark Streaming receivers is coalesced into blocks of data before storing them in Spark.
spark.streaming.receiver.maxRate infinite Maximum rate (per second) at which each receiver will push data into blocks. Effectively, each stream will consume at most this number of records per second. Setting this configuration to 0 or a negative number will put no limit on the rate.
spark.streaming.unpersist true Force RDDs generated and persisted by Spark Streaming to be automatically unpersisted from Spark's memory. The raw input data received by Spark Streaming is also automatically cleared. Setting this to false will allow the raw data and persisted RDDs to be accessible outside the streaming application as they will not be cleared automatically. But it comes at the cost of higher memory usage in Spark.

Cluster Managers

Each cluster manager in Spark has additional configuration options. Configurations can be found on the pages for each mode:

Environment Variables

Certain Spark settings can be configured through environment variables, which are read from the conf/spark-env.sh script in the directory where Spark is installed (or conf/spark-env.cmd on Windows). In Standalone and Mesos modes, this file can give machine specific information such as hostnames. It is also sourced when running local Spark applications or submission scripts.

Note that conf/spark-env.sh does not exist by default when Spark is installed. However, you can copy conf/spark-env.sh.template to create it. Make sure you make the copy executable.

The following variables can be set in spark-env.sh:

Environment VariableMeaning
JAVA_HOME Location where Java is installed (if it's not on your default `PATH`).
PYSPARK_PYTHON Python binary executable to use for PySpark.
SPARK_LOCAL_IP IP address of the machine to bind to.
SPARK_PUBLIC_DNS Hostname your Spark program will advertise to other machines.

In addition to the above, there are also options for setting up the Spark standalone cluster scripts, such as number of cores to use on each machine and maximum memory.

Since spark-env.sh is a shell script, some of these can be set programmatically – for example, you might compute SPARK_LOCAL_IP by looking up the IP of a specific network interface.

Configuring Logging

Spark uses log4j for logging. You can configure it by adding a log4j.properties file in the conf directory. One way to start is to copy the existing log4j.properties.template located there.