Tuning Spark

Because of the in-memory nature of most Spark computations, Spark programs can be bottlenecked by any resource in the cluster: CPU, network bandwidth, or memory. Most often, if the data fits in memory, the bottleneck is network bandwidth, but sometimes, you also need to do some tuning, such as storing RDDs in serialized form, to decrease memory usage. This guide will cover two main topics: data serialization, which is crucial for good network performance and can also reduce memory use, and memory tuning. We also sketch several smaller topics.

Data Serialization

Serialization plays an important role in the performance of any distributed application. Formats that are slow to serialize objects into, or consume a large number of bytes, will greatly slow down the computation. Often, this will be the first thing you should tune to optimize a Spark application. Spark aims to strike a balance between convenience (allowing you to work with any Java type in your operations) and performance. It provides two serialization libraries:

You can switch to using Kryo by calling System.setProperty("spark.serializer", "spark.KryoSerializer") before creating your SparkContext. The only reason it is not the default is because of the custom registration requirement, but we recommend trying it in any network-intensive application.

Finally, to register your classes with Kryo, create a public class that extends spark.KryoRegistrator and set the spark.kryo.registrator system property to point to it, as follows:

import com.esotericsoftware.kryo.Kryo

class MyRegistrator extends KryoRegistrator {
  override def registerClasses(kryo: Kryo) {
    kryo.register(classOf[MyClass1])
    kryo.register(classOf[MyClass2])
  }
}

// Make sure to set these properties *before* creating a SparkContext!
System.setProperty("spark.serializer", "spark.KryoSerializer")
System.setProperty("spark.kryo.registrator", "mypackage.MyRegistrator")
val sc = new SparkContext(...)

The Kryo documentation describes more advanced registration options, such as adding custom serialization code.

If your objects are large, you may also need to increase the spark.kryoserializer.buffer.mb system property. The default is 32, but this value needs to be large enough to hold the largest object you will serialize.

Finally, if you don’t register your classes, Kryo will still work, but it will have to store the full class name with each object, which is wasteful.

Memory Tuning

There are three considerations in tuning memory usage: the amount of memory used by your objects (you may want your entire dataset to fit in memory), the cost of accessing those objects, and the overhead of garbage collection (if you have high turnover in terms of objects).

By default, Java objects are fast to access, but can easily consume a factor of 2-5x more space than the “raw” data inside their fields. This is due to several reasons:

This section will discuss how to determine the memory usage of your objects, and how to improve it – either by changing your data structures, or by storing data in a serialized format. We will then cover tuning Spark’s cache size and the Java garbage collector.

Determining Memory Consumption

The best way to size the amount of memory consumption your dataset will require is to create an RDD, put it into cache, and look at the SparkContext logs on your driver program. The logs will tell you how much memory each partition is consuming, which you can aggregate to get the total size of the RDD. You will see messages like this:

INFO BlockManagerMasterActor: Added rdd_0_1 in memory on mbk.local:50311 (size: 717.5 KB, free: 332.3 MB)

This means that partition 1 of RDD 0 consumed 717.5 KB.

Tuning Data Structures

The first way to reduce memory consumption is to avoid the Java features that add overhead, such as pointer-based data structures and wrapper objects. There are several ways to do this:

  1. Design your data structures to prefer arrays of objects, and primitive types, instead of the standard Java or Scala collection classes (e.g. HashMap). The fastutil library provides convenient collection classes for primitive types that are compatible with the Java standard library.
  2. Avoid nested structures with a lot of small objects and pointers when possible.
  3. Consider using numeric IDs or enumeration objects instead of strings for keys.
  4. If you have less than 32 GB of RAM, set the JVM flag -XX:+UseCompressedOops to make pointers be four bytes instead of eight. Also, on Java 7 or later, try -XX:+UseCompressedStrings to store ASCII strings as just 8 bits per character. You can add these options in spark-env.sh.

Serialized RDD Storage

When your objects are still too large to efficiently store despite this tuning, a much simpler way to reduce memory usage is to store them in serialized form, using the serialized StorageLevels in the RDD persistence API, such as MEMORY_ONLY_SER. Spark will then store each RDD partition as one large byte array. The only downside of storing data in serialized form is slower access times, due to having to deserialize each object on the fly. We highly recommend using Kryo if you want to cache data in serialized form, as it leads to much smaller sizes than Java serialization (and certainly than raw Java objects).

Garbage Collection Tuning

JVM garbage collection can be a problem when you have large “churn” in terms of the RDDs stored by your program. (It is usually not a problem in programs that just read an RDD once and then run many operations on it.) When Java needs to evict old objects to make room for new ones, it will need to trace through all your Java objects and find the unused ones. The main point to remember here is that the cost of garbage collection is proportional to the number of Java objects, so using data structures with fewer objects (e.g. an array of Ints instead of a LinkedList) greatly lowers this cost. An even better method is to persist objects in serialized form, as described above: now there will be only one object (a byte array) per RDD partition. Before trying other techniques, the first thing to try if GC is a problem is to use serialized caching.

GC can also be a problem due to interference between your tasks’ working memory (the amount of space needed to run the task) and the RDDs cached on your nodes. We will discuss how to control the space allocated to the RDD cache to mitigate this.

Measuring the Impact of GC

The first step in GC tuning is to collect statistics on how frequently garbage collection occurs and the amount of time spent GC. This can be done by adding -verbose:gc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps to your SPARK_JAVA_OPTS environment variable. Next time your Spark job is run, you will see messages printed in the worker’s logs each time a garbage collection occurs. Note these logs will be on your cluster’s worker nodes (in the stdout files in their work directories), not on your driver program.

Cache Size Tuning

One important configuration parameter for GC is the amount of memory that should be used for caching RDDs. By default, Spark uses 66% of the configured memory (SPARK_MEM) to cache RDDs. This means that 33% of memory is available for any objects created during task execution.

In case your tasks slow down and you find that your JVM is garbage-collecting frequently or running out of memory, lowering this value will help reduce the memory consumption. To change this to say 50%, you can call System.setProperty("spark.storage.memoryFraction", "0.5"). Combined with the use of serialized caching, using a smaller cache should be sufficient to mitigate most of the garbage collection problems. In case you are interested in further tuning the Java GC, continue reading below.

Advanced GC Tuning

To further tune garbage collection, we first need to understand some basic information about memory management in the JVM:

The goal of GC tuning in Spark is to ensure that only long-lived RDDs are stored in the Old generation and that the Young generation is sufficiently sized to store short-lived objects. This will help avoid full GCs to collect temporary objects created during task execution. Some steps which may be useful are:

Our experience suggests that the effect of GC tuning depends on your application and the amount of memory available. There are many more tuning options described online, but at a high level, managing how frequently full GC takes place can help in reducing the overhead.

Other Considerations

Level of Parallelism

Clusters will not be fully utilized unless you set the level of parallelism for each operation high enough. Spark automatically sets the number of “map” tasks to run on each file according to its size (though you can control it through optional parameters to SparkContext.textFile, etc), and for distributed “reduce” operations, such as groupByKey and reduceByKey, it uses the largest parent RDD’s number of partitions. You can pass the level of parallelism as a second argument (see the spark.PairRDDFunctions documentation), or set the system property spark.default.parallelism to change the default. In general, we recommend 2-3 tasks per CPU core in your cluster.

Memory Usage of Reduce Tasks

Sometimes, you will get an OutOfMemoryError not because your RDDs don’t fit in memory, but because the working set of one of your tasks, such as one of the reduce tasks in groupByKey, was too large. Spark’s shuffle operations (sortByKey, groupByKey, reduceByKey, join, etc) build a hash table within each task to perform the grouping, which can often be large. The simplest fix here is to increase the level of parallelism, so that each task’s input set is smaller. Spark can efficiently support tasks as short as 200 ms, because it reuses one worker JVMs across all tasks and it has a low task launching cost, so you can safely increase the level of parallelism to more than the number of cores in your clusters.

Broadcasting Large Variables

Using the broadcast functionality available in SparkContext can greatly reduce the size of each serialized task, and the cost of launching a job over a cluster. If your tasks use any large object from the driver program inside of them (e.g. a static lookup table), consider turning it into a broadcast variable. Spark prints the serialized size of each task on the master, so you can look at that to decide whether your tasks are too large; in general tasks larger than about 20 KB are probably worth optimizing.

Summary

This has been a short guide to point out the main concerns you should know about when tuning a Spark application – most importantly, data serialization and memory tuning. For most programs, switching to Kryo serialization and persisting data in serialized form will solve most common performance issues. Feel free to ask on the Spark mailing list about other tuning best practices.