Spark Standalone Mode
- Installing Spark Standalone to a Cluster
- Starting a Cluster Manually
- Cluster Launch Scripts
- Connecting an Application to the Cluster
- Resource Scheduling
- Monitoring and Logging
- Running Alongside Hadoop
- High Availability
In addition to running on the Mesos or YARN cluster managers, Spark also provides a simple standalone deploy mode. You can launch a standalone cluster either manually, by starting a master and workers by hand, or use our provided launch scripts. It is also possible to run these daemons on a single machine for testing.
Installing Spark Standalone to a Cluster
The easiest way to deploy Spark is by running the
./make-distribution.sh script to create a binary distribution.
This distribution can be deployed to any machine with the Java runtime installed; there is no need to install Scala.
The recommended procedure is to deploy and start the master on one node first, get the master spark URL,
conf/spark-env.sh in the
dist/ directory before deploying to all the other nodes.
Starting a Cluster Manually
You can start a standalone master server by executing:
Once started, the master will print out a
spark://HOST:PORT URL for itself, which you can use to connect workers to it,
or pass as the “master” argument to
SparkContext. You can also find this URL on
the master’s web UI, which is http://localhost:8080 by default.
Similarly, you can start one or more workers and connect them to the master via:
./spark-class org.apache.spark.deploy.worker.Worker spark://IP:PORT
Once you have started a worker, look at the master’s web UI (http://localhost:8080 by default). You should see the new node listed there, along with its number of CPUs and memory (minus one gigabyte left for the OS).
Finally, the following configuration options can be passed to the master and worker:
||IP address or DNS name to listen on|
||Port for service to listen on (default: 7077 for master, random for worker)|
||Port for web UI (default: 8080 for master, 8081 for worker)|
||Total CPU cores to allow Spark applicatons to use on the machine (default: all available); only on worker|
||Total amount of memory to allow Spark applicatons to use on the machine, in a format like 1000M or 2G (default: your machine's total RAM minus 1 GB); only on worker|
||Directory to use for scratch space and job output logs (default: SPARK_HOME/work); only on worker|
Cluster Launch Scripts
To launch a Spark standalone cluster with the launch scripts, you need to create a file called
conf/slaves in your Spark directory, which should contain the hostnames of all the machines where you would like to start Spark workers, one per line. The master machine must be able to access each of the slave machines via password-less
ssh (using a private key). For testing, you can just put
localhost in this file.
Once you’ve set up this file, you can launch or stop your cluster with the following shell scripts, based on Hadoop’s deploy scripts, and available in
bin/start-master.sh- Starts a master instance on the machine the script is executed on.
bin/start-slaves.sh- Starts a slave instance on each machine specified in the
bin/start-all.sh- Starts both a master and a number of slaves as described above.
bin/stop-master.sh- Stops the master that was started via the
bin/stop-slaves.sh- Stops the slave instances that were started via
bin/stop-all.sh- Stops both the master and the slaves as described above.
Note that these scripts must be executed on the machine you want to run the Spark master on, not your local machine.
You can optionally configure the cluster further by setting environment variables in
conf/spark-env.sh. Create this file by starting with the
conf/spark-env.sh.template, and copy it to all your worker machines for the settings to take effect. The following settings are available:
||Bind the master to a specific IP address, for example a public one.|
||Start the master on a different port (default: 7077).|
||Port for the master web UI (default: 8080).|
||Start the Spark worker on a specific port (default: random).|
||Directory to run applications in, which will include both logs and scratch space (default: SPARK_HOME/work).|
||Total number of cores to allow Spark applications to use on the machine (default: all available cores).|
||Total amount of memory to allow Spark applications to use on the machine, e.g.
||Port for the worker web UI (default: 8081).|
Number of worker instances to run on each machine (default: 1). You can make this more than 1 if
you have have very large machines and would like multiple Spark worker processes. If you do set
this, make sure to also set
||Memory to allocate to the Spark master and worker daemons themselves (default: 512m).|
||JVM options for the Spark master and worker daemons themselves (default: none).|
Note: The launch scripts do not currently support Windows. To run a Spark cluster on Windows, start the master and workers by hand.
Connecting an Application to the Cluster
To run an application on the Spark cluster, simply pass the
spark://IP:PORT URL of the master as to the
To run an interactive Spark shell against the cluster, run the following command:
Note that if you are running spark-shell from one of the spark cluster machines, the
spark-shell script will
automatically set MASTER from the
SPARK_MASTER_PORT variables in
You can also pass an option
-c <numCores> to control the number of cores that spark-shell uses on the cluster.
The standalone cluster mode currently only supports a simple FIFO scheduler across applications.
However, to allow multiple concurrent users, you can control the maximum number of resources each
application will acquire.
By default, it will acquire all cores in the cluster, which only makes sense if you just run one
application at a time. You can cap the number of cores using
System.setProperty("spark.cores.max", "10") (for example).
This value must be set before initializing your SparkContext.
Monitoring and Logging
Spark’s standalone mode offers a web-based user interface to monitor the cluster. The master and each worker has its own web UI that shows cluster and job statistics. By default you can access the web UI for the master at port 8080. The port can be changed either in the configuration file or via command-line options.
In addition, detailed log output for each job is also written to the work directory of each slave node (
SPARK_HOME/work by default). You will see two files for each job,
stderr, with all output it wrote to its console.
Running Alongside Hadoop
You can run Spark alongside your existing Hadoop cluster by just launching it as a separate service on the same machines. To access Hadoop data from Spark, just use a hdfs:// URL (typically
hdfs://<namenode>:9000/path, but you can find the right URL on your Hadoop Namenode’s web UI). Alternatively, you can set up a separate cluster for Spark, and still have it access HDFS over the network; this will be slower than disk-local access, but may not be a concern if you are still running in the same local area network (e.g. you place a few Spark machines on each rack that you have Hadoop on).
By default, standalone scheduling clusters are resilient to Worker failures (insofar as Spark itself is resilient to losing work by moving it to other workers). However, the scheduler uses a Master to make scheduling decisions, and this (by default) creates a single point of failure: if the Master crashes, no new applications can be created. In order to circumvent this, we have two high availability schemes, detailed below.
Standby Masters with ZooKeeper
Utilizing ZooKeeper to provide leader election and some state storage, you can launch multiple Masters in your cluster connected to the same ZooKeeper instance. One will be elected “leader” and the others will remain in standby mode. If the current leader dies, another Master will be elected, recover the old Master’s state, and then resume scheduling. The entire recovery process (from the time the the first leader goes down) should take between 1 and 2 minutes. Note that this delay only affects scheduling new applications – applications that were already running during Master failover are unaffected.
Learn more about getting started with ZooKeeper here.
In order to enable this recovery mode, you can set SPARK_DAEMON_JAVA_OPTS in spark-env using this configuration:
||Set to ZOOKEEPER to enable standby Master recovery mode (default: NONE).|
||The ZooKeeper cluster url (e.g., 192.168.1.100:2181,192.168.1.101:2181).|
||The directory in ZooKeeper to store recovery state (default: /spark).|
Possible gotcha: If you have multiple Masters in your cluster but fail to correctly configure the Masters to use ZooKeeper, the Masters will fail to discover each other and think they’re all leaders. This will not lead to a healthy cluster state (as all Masters will schedule independently).
After you have a ZooKeeper cluster set up, enabling high availability is straightforward. Simply start multiple Master processes on different nodes with the same ZooKeeper configuration (ZooKeeper URL and directory). Masters can be added and removed at any time.
In order to schedule new applications or add Workers to the cluster, they need to know the IP address of the current leader. This can be accomplished by simply passing in a list of Masters where you used to pass in a single one. For example, you might start your SparkContext pointing to
spark://host1:port1,host2:port2. This would cause your SparkContext to try registering with both Masters – if
host1 goes down, this configuration would still be correct as we’d find the new leader,
There’s an important distinction to be made between “registering with a Master” and normal operation. When starting up, an application or Worker needs to be able to find and register with the current lead Master. Once it successfully registers, though, it is “in the system” (i.e., stored in ZooKeeper). If failover occurs, the new leader will contact all previously registered applications and Workers to inform them of the change in leadership, so they need not even have known of the existence of the new Master at startup.
Due to this property, new Masters can be created at any time, and the only thing you need to worry about is that new applications and Workers can find it to register with in case it becomes the leader. Once registered, you’re taken care of.
Single-Node Recovery with Local File System
ZooKeeper is the best way to go for production-level high availability, but if you just want to be able to restart the Master if it goes down, FILESYSTEM mode can take care of it. When applications and Workers register, they have enough state written to the provided directory so that they can be recovered upon a restart of the Master process.
In order to enable this recovery mode, you can set SPARK_DAEMON_JAVA_OPTS in spark-env using this configuration:
||Set to FILESYSTEM to enable single-node recovery mode (default: NONE).|
||The directory in which Spark will store recovery state, accessible from the Master's perspective.|
- This solution can be used in tandem with a process monitor/manager like monit, or just to enable manual recovery via restart.
- While filesystem recovery seems straightforwardly better than not doing any recovery at all, this mode may be suboptimal for certain development or experimental purposes. In particular, killing a master via stop-master.sh does not clean up its recovery state, so whenever you start a new Master, it will enter recovery mode. This could increase the startup time by up to 1 minute if it needs to wait for all previously-registered Workers/clients to timeout.
- While it’s not officially supported, you could mount an NFS directory as the recovery directory. If the original Master node dies completely, you could then start a Master on a different node, which would correctly recover all previously registered Workers/applications (equivalent to ZooKeeper recovery). Future applications will have to be able to find the new Master, however, in order to register.